LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Seat System - Seats-Seating - 2ND Row) >> Disassembly And Assembly >> Seat Backrest - 60 Percent >> Disassembly

Seat Backrest - 60 Percent: Disassembly

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 60 percent seat. Refer to SEAT .
  2. Remove the 60 percent backrest. Refer to SEAT BACKREST - 60 PERCENT .
  3. Remove the 60 percent backrest cover. Refer to SEAT BACKREST COVER - 60 PERCENT .
  4. Remove the backrest foam pad.
  5. Remove the safety belt retractor bolt.
    1. To install, tighten to 40 Nm (30 lb-ft).
  6. Remove the 2 safety belt guide bolts. Remove the safety belt guide and the safety belt retractor.
    1. To install, tighten to 48 Nm (35 lb-ft).
  7. Remove 3 screws and the hardback panel.
scientia non olet · About LEMON Manuals