LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 273 (Handles, Locks, Latches And Entry Systems - With Intelligent Access) >> General Procedures >> Remote Function Actuator (RFA) Module Keyless Entry Keypad Code Reset >> General Procedure

General Procedure

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure is for transferring the factory keyless entry keycode from the BCM-B  and programming it into the RFA  module.
  1. Carry out the keyless entry keypad code reset on the scan tool following the on-screen instructions.
    • The keyless entry keypad code reset procedure is found on the scan tool under Toolbox>Body>Security.
scientia non olet · About LEMON Manuals