LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 273 (Handles, Locks, Latches And Entry Systems - With Intelligent Access) >> General Procedures >> Keyless Entry Keypad Code Programming >> Erasing a Personal Entry Code

Erasing a Personal Entry Code

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Carry out the procedure to program a personal keyless entry code, but enter the factory set 5-digit keyless entry keypad code into all 4 personal code slots.
  2. All personal codes are now erased and only the factory set 5-digit code works.
scientia non olet · About LEMON Manuals