LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Seat System - Seats-Seating - 1ST Row) >> Removal And Installation >> Seat Cushion Cover >> Installation

Seat Cushion Cover: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the cushion cover and engage the wires into the retainers of the cushion foam pad.
    • If equipped with heated seats, make sure the cushion heater mat windows are trapped between the cushion cover wire and cushion foam pad retainers.
  2. Engage the cushion cover retainers to the cushion frame and seat track.
    • Do not engage the outboard cushion cover retainers, if equipped with manual lumbar.
  3. Install the front seat backrest, for additional information, refer to SEAT BACKREST .
scientia non olet · About LEMON Manuals