Seating - Power: Overview
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The seat control switch contains normally closed contacts which are grounded. An individual circuit is switched to voltage when a specific adjustment position is selected. The seat control switch is hardwired directly to the applicable seat motors. The motor direction is determined by the polarity of voltage supplied from the seat control switch.
The 6-way power seat is equipped with the following motors:
- Front height motor
- Rear height motor
- Horizontal motor
The 10-way power seat is also equipped with the following motors:
- Recliner motor
- Lumbar motor