LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Automatic Transmission - 6R140 (TORQSHIFT-R-6)) >> Removal & Installation >> Transmission Fluid Pan >> Removal

Transmission Fluid Pan: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
  2. Remove the transmission fluid pan drain plug and allow the transmission fluid to drain.
    Fig 1: Locating Transmission Fluid Pan Drain Plug
    G07482768Courtesy of FORD MOTOR CO.
  3. Install the transmission fluid pan drain plug.
    • Tighten to 18 Nm (159 lb-in).
      Fig 2: Locating Transmission Fluid Pan Drain Plug
      G07482768Courtesy of FORD MOTOR CO.
  4. NOTE: The transmission fluid pan gasket is a reusable gasket. Do not discard the transmission fluid pan gasket.

    Remove and 19 bolts and remove the transmission fluid pan and gasket.

    Fig 3: Locating Transmission Fluid Pan And Gasket Mounting Bolts
    G07482786Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals