LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Automatic Transmission - 6R140 (TORQSHIFT-R-6)) >> Removal & Installation >> Transmission Filler Tube - Diesel Engines >> Removal

Transmission Filler Tube - Diesel Engines: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper engine oil level indicator tube. For additional information, refer to ENGINE - 6.7L DIESEL .
  2. Remove the exhaust downpipe. For additional information, refer to EXHAUST SYSTEM .
  3. Remove the transmission fluid level indicator.
    Fig 1: Locating Transmission Fluid Level Indicator
    G07482895Courtesy of FORD MOTOR CO.
  4. Remove the lower transmission fluid filler tube bolt, remove the transmission fluid filler tube and discard the O-ring seal.
    Fig 2: Locating Transmission Fluid Filler Tube Mounting Bolt
    G07482896Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals