Transmission Filler Tube - Diesel Engines: Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Install a new transmission fluid filler tube O-ring seal and lubricate it with clean transmission fluid.

Fig 1: Locating Transmission Fluid Filler Tube O-Ring Seal
Courtesy of FORD MOTOR CO.
Install the transmission fluid filler tube in the transmission and install the lower transmission fluid filler tube bolt.
- Tighten to 25 Nm (18 lb-ft).
  
  Fig 2: Locating Transmission Fluid Filler Tube Mounting Bolt
  Courtesy of FORD MOTOR CO.
Install the exhaust downpipe. For additional information, refer to EXHAUST SYSTEM .
Install the upper engine oil level indicator tube. For additional information, refer to ENGINE - 6.7L DIESEL .
Check the transmission fluid. For additional information, refer to PRELIMINARY INSPECTION .