Special Tool(s)
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Installer, Output Shaft Seal 307-650 |
|
| Remover/Installer, Drive Pinion Oil Seal 205-440 |
|
| Remover, Torque Converter Fluid Seal 307-309 (T94P-77001-A) |
|
| Slide Hammer 100-001 (T50T-100-A) |
|
| Socket, Output Shaft Nut 307-649 |
|
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool |
| Item | Part Number | Description |
|---|---|---|
| 1 | N811880 | Driveshaft flange bolts (4 required) |
| 2 | 4602 | Driveshaft |
| 3 | - | Output shaft flange bolt (part of 7089) |
| 4 | - | Output shaft flange washer (part of 7089) |
| 5 | 7089 | Output shaft flange |
| 6 | 7085 | Output shaft nut |
| 7 | 7052 | Output shaft seal |