LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Automatic Transmission - 6R140 (TORQSHIFT-R-6)) >> Diagnosis & Testing >> Torque Converter Diagnosis >> Torque Converter Clutch Mechanical Operation Test

Torque Converter Clutch Mechanical Operation Test

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The torque converter clutch (TCC) mechanical operation can be isolated to evaluate clutch function. Using the scan tool and the active command PID the symptom can be eliminated by turning the TCC on or off.

  1. Ignition ON
  2. Enter the following diagnostic mode on the scan tool: PCM (gas) TCM (diesel) DataLogger.
    NOTE: The vehicle must be moving at speeds of 56 km/h (35mph) or higher to enable the active command.
  3. Select the (TCC_OSC) active command. Command the TCC Off.
  4. If the concern is still present, proceed with transmission diagnostics, if the concern is not present replace the torque converter.
scientia non olet · About LEMON Manuals