LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Automatic Transmission - 6R140 (TORQSHIFT-R-6)) >> Diagnosis & Testing >> Preliminary Inspection >> Check Transmission Fluid Level & Condition >> Transmission Fluid Condition Check

Transmission Fluid Condition Check

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid level indicator and allow the transmission fluid to drip onto a facial tissue and examine the stain.
  2. Observe the color and the odor.
  3. If evidence of solid material is found, remove the transmission fluid pan for further inspection.
  4. If the stain is foamy and pink in color, this may indicate coolant in the transmission. The engine cooling system should also be inspected at this time.
  5. If transmission fluid contamination or transmission failure is confirmed by the sediment in the bottom of the transmission fluid pan, disassemble and thoroughly clean the transmission, including the torque converter and transmission fluid cooler tubes. Install a new auxiliary transmission fluid cooler.