LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Automatic Transmission - 6R140 (TORQSHIFT-R-6)) >> Diagnosis & Testing >> Diagnostic Trouble Code (DTC) Charts >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
G06139341
 Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool

Using a scan tool to retrieve DTCs, begin with and repair all non-transmission related DTCs. Start with the U-DTCs (communication link codes) and repair any transmission-related DTCs.

Limp-home mode is a default condition to protect the engine and transmission when certain faults occur.

The limp-home gear is held until the vehicle is placed in REVERSE, PARK or the vehicle has been restarted. After these action(s) the vehicle defaults to the limp-home mode of 5th gear.

scientia non olet · About LEMON Manuals