Steering Wheel: Removal
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the driver air bag module. REFER to DRIVER AIRBAG .
-
NOTE: Mark the steering wheel and column shaft for reference during installation.
Remove the steering wheel bolt.
- Disconnect the steering wheel switches electrical connector.
-
NOTE: Do not remove the steering wheel by hitting the shaft with a hammer. Damage to the column may occur.
Remove the steering wheel.
- Tape the clockspring center rotor to the outer housing to keep it from rotating.