LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Parking Brake System - Parking Brake & Actuation) >> General Procedures >> Parking Brake Cable - RH Rear >> Removal

Parking Brake Cable - RH Rear: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the parking brake cable tension. Refer to PARKING BRAKE CABLE TENSION RELEASE .
  2. Separate the RH cable from the LH at the conduit equalizer and remove the cable from the wireform bracket.
  3. Remove the 3 parking brake cable bracket bolts.
  4. Remove the RH wheel well bracket bolt.
  5. Release the parking brake cable from the brake caliper and remove the cable.