Turbine Shaft Speed (TSS) Sensor & Intermediate Shaft Speed Sensor: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the Turbine Shaft Speed (TSS) and intermediate shaft speed sensor connector.

Fig 1: Locating Turbine Shaft Speed (TSS) And Intermediate Shaft Speed Sensor Connector
Courtesy of FORD MOTOR CO.

NOTE: Prior to removing the sensor, make sure that the area around the sensor is free of foreign material to prevent contamination entering the transmission.
Remove the TSS and intermediate shaft speed sensor.
1. Remove the bolt.
2. Remove the TSS and intermediate shaft speed sensor.
  
  Fig 2: Identifying TSS And Intermediate Shaft Speed Sensor And Bolts
  Courtesy of FORD MOTOR CO.