Special Tool(s)
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Aligner, Clutch Spring Compressor 307-455 |
|
| Compressor, Clutch Spring 307-015 (T65L-77515-A) |
|
| Fixture Body, Coast Clutch 307-385 |
|
| Fixture Handle, Coast Clutch 307-384 |
|
| Handle 205-153 (T80T-4000-W) |
|
| Handle, Torque Converter 307-091 (T81P-7902-C) |
|
| Loading Fixture, Clutch 307-S383 |
|
| Remover, Output Shaft Seal/Housing 307-460 |
|
| Remover, Pilot Bearing 308-001 (T58L-101-B) |
|
| Remover, Torque Converter Fluid Seal 307-309 (T94P-77001-BH) (used with 100-001) |
|
| Remover, Transmission Extension Housing Seal 307-454 (used with 307-309) |
|
| Remover, Transmission Fluid Pump 307-221 (T89T-70010-A) |
|
| Retaining Ring Pliers 307-343 (T95P-77001-AHR) |
|
| Retainer, Torque Converter 307-346 (T97T-7902-A) |
|
| Roll Pin Set 211-S060 (T78P-3504-N) |
|
| Slide Hammer 100-001 (T50T-100-A) |
|
| Socket, Output Shaft Locknut 307-458 |