LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 5R110W (TORQSHIFT-R)) >> Disassembly & Assembly Of Subassemblies >> Input Shell Assembly >> Check

Input Shell Assembly: Check

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Input Shell Assembly
G06141030Courtesy of FORD MOTOR CO.
  1. Clean and inspect the forward/reverse sun gear and input shell assembly. Check the sun gear teeth, lug teeth and thrust surface for damage. If any evidence of damage is found, a new input shell assembly must be installed.
  2. Inspect the front bushing for damage. If any damage is found a new input shell assembly must be installed.
    Fig 2: Locating Front Bushing
    G06141031Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals