LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 5R110W (TORQSHIFT-R)) >> Disassembly & Assembly Of Subassemblies >> Forward Geartrain - Assembly >> Assembly

Forward Geartrain - Assembly: Assembly

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the forward clutch assembly into the direct clutch assembly.
    Fig 1: Identifying Forward Clutch Assembly
    G06141034Courtesy of FORD MOTOR CO.
  2. Install the No. 9 forward clutch bearing.
    Fig 2: Locating No. 9 Forward Clutch Bearing
    G06141035Courtesy of FORD MOTOR CO.
  3. Install the forward hub and ring gear assembly.
    Fig 3: Locating Forward Hub And Ring Gear Assembly
    G06599874Courtesy of FORD MOTOR CO.
  4. Install the planet carrier and bearing assembly.
    Fig 4: Locating Planet Carrier And Bearing Assembly
    G06141037Courtesy of FORD MOTOR CO.
  5. Install the No. 12 thrust bearing onto the forward carrier assembly.
    Fig 5: Locating No. 12 Thrust Bearing
    G06141038Courtesy of FORD MOTOR CO.
  6. Install the input shell assembly.
    • Make sure the tab is engaged in the forward clutch assembly.
      Fig 6: Locating Input Shell Assembly
      G06141039Courtesy of FORD MOTOR CO.
  7. Install the Adapter and the Transmission Forward Clutch Assembly Installer. Position aside to use during transmission assembly.
    Fig 7: Installing Adapter And Transmission Forward Clutch Assembly Installer
    G06141040Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals