LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 5R110W (TORQSHIFT-R)) >> Disassembly & Assembly Of Subassemblies >> Center Support >> Assembly

Center Support: Assembly

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Follow the disassembly procedure in reverse order.
    • Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.
    • Install new seals.
  2. After the center support is completely assembled, apply air to the port and verify the function of the piston.
    Fig 1: Locating Piston Port
    G06140986Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals