LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 5R110W (TORQSHIFT-R)) >> Diagnosis & Testing >> Pinpoint Tests - OSC Equipped Vehicle >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
G07402577
Fluke 77-IV Digital Multimeter
FLU77-4 or equivalent
G06096965
Transmission Fluid Pressure Gauge
307-004 (T57L-77820-A)
G06139341
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
NOTE: If equipped, turn the Power Take-Off (PTO) unit off for correct test results. For a description of PTO operation, refer to TRANSMISSION ELECTRONIC CONTROL SYSTEM . The PCM self-test test is not accessible when the PTO unit is in operation. Shift Solenoid Pressure Control B (SSPCB) is on when the PTO is in operation.

When an electrical connector or solenoid body is disconnected, inspect the connector for terminal condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install a new connector as required.