LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Anti-Theft System - Passive Anti-Theft System (Pats), With Intelligent Access) >> Description And Operation >> Passive Anti-Theft System (PATS) - With Intelligent Access (IA) >> System Operation >> RFA Module PIDs

RFA Module PIDs

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Acronym Name Description
BCM  _ID BCM  ID Status Stored Indicates if there is a BCM  identification currently stored in the RFA  module. Must read stored for the engine to start.
BCM_VFY BCM  Verify OK Indicates if the module identification check between the BCM  and the RFA  module passes. Must read yes for the engine to start.
MASTERKEY Master Key Present Indicates if the RFA  module detects a programmed Intelligent Access (IA) key in the vehicle. Must read stored for the engine to start.
MIN_KEYS Minimum Number Of Keys Required Minimum number of programmed keys required. This PID always reads 2.
N_KEYCODE Number Of Programmed Remote Keys Number of keys currently programmed into the RFA  module.
PATSENABL PATS  System Status - Enable Status Indicates if PATS  allows the engine to start. Must read enabled for the engine to start.
scientia non olet · About LEMON Manuals