LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (Electronic Engine Controls) >> Removal And Installation >> Variable Camshaft Timing (VCT) Oil Control Solenoid - 2.0L GTDI >> Removal

Variable Camshaft Timing (VCT) Oil Control Solenoid - 2.0L GTDI: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure in this article, refer to SAFETY WARNINGS . Failure to follow this instruction may result in serious personal injury.
  1. Remove the valve cover. REFER to VALVE COVER .
  2. Remove the 2 bolts and the VCT  oil control solenoids.
    • To install, tighten to 10 Nm (89 lb-in).
      G08030599
scientia non olet · About LEMON Manuals