Hardwired Inputs
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The IPC requires hardwired inputs from components that are not hardwired to other modules and, therefore, are not on either HS-CAN or the MS-CAN but are required for specific IPC functions or gateway requirements. For additional information about the gateway function, refer to GATEWAY FUNCTION .
The hardwired inputs are provided by the following components:
- Fuel pump module (primary fuel level input)
- Fuel level sensor (secondary fuel level input)
- Park detect switch (part of the floor shifter assembly)
- Washer fluid level switch