Axle Vent
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If a plugged vent cannot be cleared, install a new vent.
A plugged vent or vent hose will cause excessive seal lip wear due to internal pressure buildup. If a leak occurs, check the vent and the vent hose. Remove the hose from the vent nipple and clear the hose of any foreign material. While the hose is removed, pass a length of mechanic's wire or a small diameter Allen wrench in and out of the vent to clean it. Connect the hose when done.