LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Bumper System) >> Removal And Installation >> Bumper - Front >> Removal

Bumper - Front: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper cover. Refer to BUMPER COVER - FRONT .
  2. NOTE: The front bumper beam is tack-welded in assembly. It is not necessary to re-weld for installation.

    Remove the 4 bolts each side and remove the front bumper beam.

    G09091528
scientia non olet · About LEMON Manuals