DTC Chart: FLM
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this service information assumes a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to DIAGNOSTIC METHODS for information about these practices.
DTC DESCRIPTION - FLM
| DTC | Description | Action |
|---|---|---|
| B10A6:72 | Main Light Switch: Actuator Stuck Open | INSTALL a new FLM . Refer to FRONT LIGHTING CONTROL MODULE (FLM) . |
| B1130:71 | Light switch module: Actuator Stuck | INSTALL a new FLM . Refer to FRONT LIGHTING CONTROL MODULE (FLM) . |
| B11D9:16 | Vehicle Battery: Circuit Voltage Below Threshold | GO to PINPOINT TEST AE . |
| B11D9:17 | Vehicle Battery: Circuit Voltage Above Threshold | GO to PINPOINT TEST AF . |
| U0140:87 | Lost Communication With Body Control Module: Missing Message | GO to PINPOINT TEST AG . |
| U0422:86 | Invalid Data Received From Body Control Module: Signal Invalid | DIAGNOSE all non-network DTCs from the BCM . REFER to MULTIFUNCTION ELECTRONIC MODULES . |
| U3000:49 | Control Module: Internal Electronic Failure | INSTALL a new FLM . Refer to FRONT LIGHTING CONTROL MODULE (FLM) . |