Description And Operation: Autolamps: Overview
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The autolamp system consists of:
- Light sensor
- Headlamp switch (integrated into the FLM )
- BCM
The autolamp system provides light sensitive automatic on/off control of the exterior lamps. The autolamp system keeps the exterior lamps on for a preselected period of time after the ignition is turned off (20 seconds is the factory default setting). The preselected time lapse is adjustable up to approximately 3 minutes. To change the autolamps time delay, Refer to AUTOLAMPS TIME DELAY ADJUSTMENT .