LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Electronic Power Assist Steering System) >> DTC Symptoms >> DTC Index >> DTC U2011: Motor >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

The PSCM will use the motor inside the EPAS gear to calculate the angle and rotation of the steering wheel and then transmit this information to other modules over the HS-CAN bus.

When one or both of these DTCs are set the PSCM will remove steering assist, enter into a manual mode and transmit an invalid steering angle message over the HS-CAN bus.

The PSCM will send a message to the IPC to display the POWER STEERING ASSIST FAULT message in the message center.

Failure Action
49 INSTALL a new steering gear. REFER to STEERING GEAR  .
61 GO to PINPOINT TEST B