Roof Opening Panel Control Switch: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Engage the 2 tabs and connect the switch bezel to the switch.

Fig 1: Locating Switch Bezel Tabs
Courtesy of FORD MOTOR CO.
Engage the 4 tabs and install the switch into the light assembly.

Fig 2: Locating Light Assembly Tabs
Courtesy of FORD MOTOR CO.
Install the light assembly into the overhead console.
- Install the light assembly into the over head console and engage the 2 front tabs.
- Rotate the light assembly slightly toward the over head console and engage the 2 rear tabs.
  
  Fig 3: Identifying Overhead Console Front And Rear Tabs
  Courtesy of FORD MOTOR CO.
Install the overhead console. REFER to CONSOLE - OVERHEAD .