Roof Opening Panel: Overview
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The roof opening panel assembly is equipped with a power shade, fixed glass panel and a sliding glass panel. The sliding glass panel and shade are equipped with one-touch open and one-touch close (with obstacle detection) features. One-touch operation can be stopped at any time by pressing the roof opening panel switch a second time.
The accessory delay relay, located in the BCM , provides voltage for the operation of the power windows and the roof opening panel. For additional information, REFER to GLASS, FRAMES AND MECHANISMS - DELAYED ACCESSORY POWER .