LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Mechanical - 6.7L Diesel) >> In-Vehicle Repair >> Oil Level Indicator and Tube >> Removal

Oil Level Indicator and Tube: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Upper oil level indicator tube 

  1. Position the vehicle on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the bolt and position aside the transmission oil level indicator tube.
  3. Remove the oil level indicator.
  4. Remove the bolt for the oil level indicator tube.
  5. From below, remove the oil level indicator tube from the engine rear cover.
  6. Remove the oil level indicator tube from the vehicle.
    • Remove and discard the 2 O-ring seals.

    Lower oil level indicator tube 

  7. Remove the engine rear cover. For additional information, refer to ENGINE REAR COVER .
  8. Remove the 2 bolts and the lower oil level indicator tube.
scientia non olet · About LEMON Manuals