LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Mechanical - 6.7L Diesel) >> In-Vehicle Repair >> Hydraulic Lash Adjuster >> Installation

Hydraulic Lash Adjuster: Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Apply clean engine oil to the hydraulic lash adjuster prior to installation.

    Using a magnetic telescopic pick-up tool, install the hydraulic lash adjuster into the valve tappet assembly.

    • Verify that the hydraulic lash adjuster is properly installed.
  2. Install the rocker arm assemblies. For additional information, refer to ROCKER ARM .
scientia non olet · About LEMON Manuals