LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Mechanical - 6.7L Diesel) >> General Procedures >> Crankshaft Connecting Rod Bearing Journal Diameter

Crankshaft Connecting Rod Bearing Journal Diameter

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect crankshaft journals for scratches, grooves and scoring.
  2. Use a 50-75 mm (2-3 in) micrometer to measure the diameter of each journal. Measure each journal at 2 points, 90 degrees apart. Move the micrometer over the entire width of the journal. For additional information, refer to SPECIFICATIONS .
    Fig 1: Measuring Crankshaft Connecting Rod Bearing Journal Diameter Using Micrometer
    G08593071Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals