LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Climate Control System - DATC) >> Removal And Installation >> Air Inlet Duct >> Removal

Air Inlet Duct: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the heater core and evaporator core housing. Refer to HEATER CORE AND EVAPORATOR CORE HOUSING .
  2. Remove the 5 air inlet duct screws.
  3. Remove the air inlet duct.
scientia non olet · About LEMON Manuals