LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Climate Control System - DATC) >> Removal And Installation >> Air Inlet Duct >> Installation

Air Inlet Duct: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the air inlet duct.
  2. Install the 5 air inlet duct screws.
  3. Install the heater core and evaporator core housing. Refer to HEATER CORE AND EVAPORATOR CORE HOUSING .
scientia non olet · About LEMON Manuals