Component Location
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The 3.5L Ti-VCT and the 3.7L Ti-VCT exhaust system consists of:
- a LH one-piece catalytic converter manifold that is mounted to the LH cylinder head.
- a RH one-piece catalytic converter manifold that is mounted to the RH cylinder head.
- an exhaust Y-pipe that is mounted to the LH and RH catalytic converters along with the muffler and tailpipe assembly.
- a muffler and tail pipe assembly.
The 3.5L GTDI exhaust system consists of:
- two turbocharger-mounted catalytic converters.
- a LH and LH exhaust flexible pipes that is mounted to the catalytic converters along with the muffler and tailpipe assembly.
- an underbody catalytic converter.
- a underbody catalytic converter and resonator which is part of the muffler and tailpipe assembly.
- isolators installed on the body and muffler hangers.
The 2.0L GTDI exhaust system consists of:
- a catalytic converter that is mounted to the turbocharger.
- a exhaust flexible pipe that is mounted to the catalytic converter along with the muffler and tailpipe assembly.
- a muffler and tail pipe assembly.