LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Engine System - General Information) >> General Procedures >> Piston Ring-to-Groove Clearance >> General Procedure

General Procedure

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to General Specifications in the appropriate engine service information for the specification.
  1. Inspect the piston for ring land damage or accelerated wear.
    G06064082
  2. Using the Feeler Gauge Set, measure the piston ring-to-groove clearance.
    G06064083
scientia non olet · About LEMON Manuals