LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Engine System - General Information) >> General Procedures >> Cylinder Bore Out-of-Round >> General Procedure

General Procedure

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to General Specifications in the appropriate engine service information for the specification.
  1. Measure the cylinder bore in 2 directions. The difference is the out-of-round.
    G06073203
scientia non olet · About LEMON Manuals