General Procedure
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to General Specifications in the
appropriate engine service information for the specification.
-
NOTE: Crankshaft main bearing journals must be within specifications before checking journal clearance.
Remove the crankshaft main bearing caps and crankshaft main bearing.
- Lay a piece of Plastigage across the face of each crankshaft main bearing surface.
-
NOTE: Do not turn the crankshaft while carrying out this procedure.
Install and remove the crankshaft main bearing cap.
- Verify the crankshaft journal clearance.