LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Engine System - General Information) >> General Procedures >> Crankshaft End Play >> General Procedure

General Procedure

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to General Specifications in the appropriate engine service information for the specification.
  1. Install the Dial Indicator Gauge with Holding Fixture.
  2. Position the crankshaft to the rear of the cylinder block.
  3. Zero the Dial Indicator Gauge.
  4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.
    G06064065
scientia non olet · About LEMON Manuals