LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Transfer Case - Power Transfer Unit) >> Removal And Installation >> Input Shaft Seal >> Installation

Input Shaft Seal: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the PTU  input shaft opening.
    G09089755Courtesy of FORD MOTOR CO.
  2. Position the inner seal above the PTU  input shaft opening with the spring facing toward the PTU  . Using 308-777/4 and 205-153 T80T-4000-W, install the seal.
    G07810576Courtesy of FORD MOTOR CO.
  3. Position the outer seal above the PTU  input shaft opening with the spring facing away from the PTU  . Using 308-777/5 and 205-153 T80T-4000-W, install the seal.
    G07810577Courtesy of FORD MOTOR CO.
  4. Install the new compression seal.
    G07795468Courtesy of FORD MOTOR CO.
  5. Install the PTU  . Refer to POWER TRANSFER UNIT (PTU) .
  6. Fill the PTU  as necessary. Refer to POWER TRANSFER UNIT (PTU) DRAINING AND FILLING .
scientia non olet · About LEMON Manuals