LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Transfer Case - Power Transfer Unit) >> Removal And Installation >> Cover Seal >> Installation

Cover Seal: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble 205-907, 308-431 and 308-221 T94P-7025-BH as shown in illustration.
    Fig 1: Assembling 205-907, 308-431 And 308-221 T94P-7025-BH
    G06064379Courtesy of FORD MOTOR CO.
  2. Using the 205-907, 308-431 and 308-221 T94P-7025-BH, install the cover seal in the PTU  .
    Fig 2: Installing Cover Seal Using Tool
    G06270906Courtesy of FORD MOTOR CO.
  3. Install the intermediate shaft seal and deflector. Refer to INTERMEDIATE SHAFT SEAL AND DEFLECTOR .
  4. Fill the PTU  as necessary. Refer to POWER TRANSFER UNIT (PTU) DRAINING AND FILLING .
scientia non olet · About LEMON Manuals