Vehicle Certification (VC) Label Example
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The VC label is located in the driver door jamb. The axle code is on the VC label.
The axle ratio is 2.93 and the ring gear has a diameter of 174 mm (6.8504 in).
The wheel speed sensor rings for FWD vehicles are located on the front halfshafts and are mounted to the rear inner spindles.
The wheel speed sensor rings are located on the front and rear halfshafts for AWD vehicles.