Torque Specifications
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Part Number | Torque |
|---|---|---|
| Differential carrier baffle bolts | - | 12 Nm (106 lb-in) |
| Fluid reservoir bolts | 7J283 | 12 Nm (106 lb-in) |
| Fluid pump-to-torque converter housing bolts | - | 12 Nm (106 lb-in) |
| Line pressure tap plug | 7A010 | 9 Nm (80 lb-in) |
| Main control cover bolts | - | For 3.5L GTDI
refer to, MAIN CONTROL COVER - 3.5L GTDI . For 3.5L Ti-VCT refer to, MAIN CONTROL COVER - 3.5L TI-VCT . For 3.7L Ti-VCT refer to, MAIN CONTROL COVER - 3.7L TI-VCT . |
| Main control valve body bolts | - | Refer to MAIN CONTROL VALVE BODY . |
| Main control lever nut | - | Refer to MANUAL CONTROL LEVER SHAFT SEAL . |
| OSS sensor bolt | 7J283 | 12 Nm (106 lb-in) |
| Park pawl retainer bolts | 7J283 | 12 Nm (106 lb-in) |
| Roll restrictor bracket bolts - AWD | - | 90 Nm (66 lb-ft) |
| Roll restrictor bracket bolts - FWD | - | 103 Nm (76 lb-ft) |
| Roll restrictor-to-subframe clevis bolt | - | 103 Nm (76 lb-ft) |
| Selector lever cable bracket bolts | W500213 | 12 Nm (106 lb-in) |
| Shim gauge bolts | - | 24 Nm (18 lb-ft) |
| Solenoid body bolts | - | Refer to SOLENOID BODY ASSEMBLY . |
| Starter battery terminal | W706414 | 12 Nm (106 lb-in) |
| Starter motor stud bolts | - | 26 Nm (19 lb-ft) |
| Starter solenoid terminal | N805320 | 6 Nm (53 lb-in) |
| Stator support feed tube bolts (hex head) | 7J284 | 12 Nm (106 lb-in) |
| Stator support feed tube bolts (Torx head) | 7J330 | 7 Nm (62 lb-in) |
| Stator support-to-torque converter housing bolts | - | Refer to TRANSAXLE - OVERHAUL |
| Torque converter bolts | - | Refer to TRANSMISSION - ALL WHEEL DRIVE (AWD) or TRANSMISSION - FRONT WHEEL DRIVE (FWD) or TRANSMISSION - 3.5L GTDI . |
| Torque converter housing bolts | W711937 | 48 Nm (35 lb-ft) |
| Transmission support insulator upper bolts | - | 70 Nm (52 lb-ft) |
| Transmission support insulator lower bolts | - | 55 Nm (41 lb-ft) |
| Transmission support insulator bracket bolt | - | 80 Nm (59 lb-ft) |
| Transmission support insulator bracket nuts | - | 63 Nm (46 lb-ft) |
| Transmission fluid cooler thermal bypass valve bracket nuts | - | 9 Nm (80 lb-in) |
| Transmission mounted transmission fluid cooler tube bolt | - | 9 Nm (80 lb-in) |
| Transmission mounted transmission fluid cooler tube fittings | - | 30 Nm (22 lb-ft) |
| Transmission fluid drain plug | 7A010 | 9 Nm (80 lb-in) |
| TSS sensor bolt | - | 12 Nm (106 lb-in) |
| Torque converter housing-to-transmission case bolts | - | Refer to TRANSAXLE - OVERHAUL |
| Valve body assembly bolts | - | 12 Nm (106 lb-in) |