Main Control Cover - 3.5L GTDI: Removal
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING .
- Remove the ACL and outlet pipe. REFER to INTAKE AIR DISTRIBUTION SYSTEM & INTAKE AIR FILTERING SYSTEM .
- FUEL SYSTEM - GENERAL INFORMATION
- If equipped.
- Drain the transmission fluid.
-
NOTE: Note the location of the of the studbolts for assembly.