Transmission Control Module (TCM): Installation
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the TCM and the 2 TCM nuts.
-
NOTE: Keep the TCM electrical connector straight when connecting it or damage to the connector terminals can occur.
Connect the TCM electrical connector and slide the lock tab down to lock the connector.
- Restore the module configuration. Carry out the module configuration restore steps of the PMI procedure. REFER to MODULE CONFIGURATION .
- Using the scan tool, download the solenoid body strategy. Refer to SOLENOID BODY STRATEGY DOWNLOAD .