LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Automatic Transmission - 6F35) >> Removal And Installation >> Manual Control Lever Shaft Seal >> Installation

Manual Control Lever Shaft Seal: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using 307-581, install a new manual control lever shaft seal.
    G08031010Courtesy of FORD MOTOR CO.
  2. Install the TR  sensor. Refer to TRANSMISSION RANGE (TR) SENSOR .
scientia non olet · About LEMON Manuals