LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Engine Mechanical -3.5L Ti-VCT) >> Removal And Installation >> Valve Spring, Retainer and Seal >> Installation

Valve Spring, Retainer and Seal: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Lubricate the valve stem seal with clean engine oil prior to installation.

    Using 303-470 T94P-6510-CH, install a new valve stem seal.

    G08029341
  2. Using 303-300 T87C-6565-A, 303-350 T89P-6565-A and 303-1249, install the valve spring, retainer and key.
    G08029339
  3. Install the valve tappets. Refer to VALVE TAPPETS .
scientia non olet · About LEMON Manuals