LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Engine Mechanical -3.5L Ti-VCT) >> Removal And Installation >> Flexplate >> Removal

Removal And Installation: Flexplate: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure, refer to SAFETY WARNINGS . Failure to follow this instruction may result in serious personal injury.
  1. With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING , Lifting Points.
  2. Remove the transaxle. REFER to TRANSMISSION - FRONT WHEEL DRIVE (FWD) or REFER to TRANSMISSION - ALL WHEEL DRIVE (AWD) .
  3. Remove the 8 bolts and the flexplate.
    G08621636
scientia non olet · About LEMON Manuals