LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Engine Mechanical -3.5L Ti-VCT) >> Removal And Installation >> Engine Oil Pressure (EOP) Switch >> Removal

Engine Oil Pressure (EOP) Switch: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. If equipped, remove the engine oil cooler. Refer to OIL COOLER .
  2. Disconnect the EOP  switch electrical connector.
    G08029512
  3. Remove the EOP  switch.
    G08029513
scientia non olet · About LEMON Manuals